10 Questions to Ask Your Hardwood Flooring Supplier

Written by admin

twelve Questions to Ask Your Hardwood Flooring Supplier Before Getting

1 . If there are any problems, who do I call up?
Most flooring stores will be buying the flooring they are promoting to you from a distributor who purchases the flooring from the designer. Sometime, especially with products coming from overseas there is one or more distributor involved. In many cases if you have an issue with your flooring as well as complain to the retailer they will call the distributor and permit them know there is a complaint, the distributor will notify the manufacturer there has been a complaint. In most cases the manufacturer will refute the complaint and if you are lucky they will even give a representative to deny your claim in person. Most stores would correct a manufacturing problem to make their customers delighted because they are the ones dealing with the customers face to face but in reality they just do not have the final say unless they want to replace the flooring outside of their own pocket. The manufacturer is so far removed from the actual buyer that they know it is better for their bottom line to deny the actual claims and assume they will never have to deal with the issue since they’re so protected by their warranties. Picture a person at the desk with a pile of hardwood flooring claims unique desk with a big stamp that says “denied”.

installment payments on your How durable is the finish?
Durability is probably the most important aspects to consider when purchasing a prefinished hardwood floor. The finish is what you will be actually walking on and must be very durable to have a lovely lasting floor for years to come. Many imported prefinished floors get very little durability and the finish can be taken off with a few swipes of 150 grit sandpaper. When buying hardwood there are a few solutions to test the finish: one would be to take 150 grit sandpaper and rub the finish to see if the finish will come off and also two would be to firmly press the edge of a coin contrary to the finish, a quality finish will dent but not come off. Good quality manufacturers will have aluminum oxide or better yet titanium o2 hardeners in the finish. Many offshore manufactured products will say to you they have aluminum oxide in them but actually do not. To find out if a hardwood floor has aluminum oxide in the end simply put the sample in your microwave and if it leads to, it does indeed have aluminum oxide in the finish. I realize that may seem a little strange but it’s something worth checking out because hardwood installation toronto is a big investment and you want to know the particular durability of the finish.

3. What is the structural and surface guaranty?
This is a very important part of choosing a hardwood floor. Anyone could put a 25, 30, or 40 year manufacturer’s warranty on the finish of their product but the real question is usually; will they stand behind their warranty. Many massive laminate flooring toronto manufacturers have warranties that are up to eight pages. When you read through the entire warranty and all of the omissions it really gives the client the impression that there is actually zero warranty at all. The problem is most consumers don’t take the time to look into the warranty and are shocked when they find out the issue they are obtaining with the flooring is one of the “exclusions”. Most warranties will say that there’s an industry standard of 5% margin for error which means when your entire floor is complete the manufacturer is are generally have 5% of the boards defective. That means a concluded floor of 1000 square feet would be allowed roughly hundred boards with any kind of defect.

4. What is the waste variable of the flooring?
The waste factor of the flooring is a crucial issue as well. If 10-15% waste is what is suggested with the manufacturer than that means you will have to buy that much more to get plenty of to install your entire floor. The higher the recommended waste consideration the lower quality the product. You may find when comparing products for price tag on may be more than the other but you must factor in the difference in waste to the price. A floor for $6 using 3% waste would cost you $6. 18 which would function as a same cost as a floor with 10% waste that is certainly $5. 62 and the product with 3% waste will be a higher quality product. The bottom line is you shouldn’t have to sort typically the waste out of the boxes; the manufacturers should be taking the waste out and about at the plant so you are only getting good quality pieces you may install in your floor.

5. What is the average length of the floor boards?
The question of the average board lengths is certainly one that is not commonly asked when it comes to hardwood flooring. It is a thing not a lot of people think about until it is brought up. The much longer the average length of the floor the better the floor looks especially in great rooms. One foot and two foot lengths develop a very choppy and unattractive floor. The box size is not necessarily the only way to tell what the average length is; you can have a 8′ box with all short pieces in it. Many ocean going manufactured products are in four foot boxes with certainly will ensure you are getting a floor with very short lengths. It’s not only offshore products that have short lengths but many Us made products as well. One very high end Canadian brand has an average length of 27-29″ in their 3-1/4″ Select along with Better Red Oak.

About the author